Model | ACT-1000N | ACT-1000N-V300 |
---|---|---|
Capacity | 1000N | |
Resolution | 1N | |
Accuracy | +/-0.5% F.S +/-1digit | |
Unit | N, kgf ,lbf (*1) | |
Sampling rate | 2000Hz | |
Safe overload rating | Approx. 150% F.S. | |
Overload warning | 110% or less | |
Measuring speed0 | 10/25/50/100 mm/min(Choose from 4 steps) | 25/50/100/300 mm/min(Choose from 4 step) |
Stroke | Approx.50mm | |
Allowable sample diameter | Terminal side: Slit width 1~8mm (*2) | |
Harness side: Aperture width 1~8mm (*2) | ||
Allowable sample length | 100mm or more | |
Mode | BREAK/KEEP mode | |
Number of registered test condition | 26 patterns(A~Z) | |
Output | USB/RS232C/pass or fail decision signal (OK/NG) | |
Security lock | Emergency stop button and Overload prevention (at the power on) | |
Power supply | AC100~240V | |
Weight | Approx.11kg | |
Size | W400*D240*H150 | |
Operating environment | Temperature :0~40 degree Celsius Humidity:20~80%RH | |
Conformance Testing | -UL 486A-486B(2013) “ Standard for Safety for Wire Connectors, 9.3.4 Pullout test”-IEC 60512-16-4(2008) ” Connectors for electronic equipment – Tests and measurements- Part 16-4: Mechanical tests on contacts and terminations – Test 16d: Tensile strength (crimped connections)”-JIS C2805(2010) “Crimp-type terminal lugs for copper conductors.” |
|
Accessory | Software, USB cable, Power cord, Inspection Certificate |
Selectable Test Mode: BREAK mode and KEEP mode
2 modes are selectable. BREAK mode: In this mode, you can perform destructive test.
KEEP mode: In this mode, you can perform nondestructive test to apply specific force in set time.
The OK/NG (Pass/Fail) result is clear to see in both test modes.
Storable 26 Test Patterns
The tester is capable of saving up to 26 test patterns as presetting.
You can immediately recall each pattern. Smooth test condition change is possible.
Easy Data Management
ACT-1000N includes the software. It is ideal for checking the result such as force value, OK/NG (Pass/Fail) result and each test condition.
Also, the statistics such as No.of OK/ NG/ Whole values, average, etc. is automatically calculated. It is also possible for each test pattern.
[Performable Test According to Standard]
- UL 486A-486B(2013) “ Standard for Safety for Wire Connectors 9.3.4 Pullout test” .
Quý khách có nhu cầu vui lòng liên hệ Mr Khoa 0987.998.477 hoặc e-mail: sales@shinzo.com.vn
Maker CEDAR - Made in Japan. Suitable for daily inspection...
Chi tiếtMaker ATTONIC - Made in Japan. It is more simple and...
Chi tiếtCỤC CHUẨN MÁY ĐO LỰC XOẮN CEDAR OW-10....
Chi tiếtTHIẾT BỊ ĐO LỰC KÉO IMADA FB/FS SERIES, FB-10N,...
Chi tiếtMaker: Aikoh - Made in Japan. Đây là thiết bị...
Chi tiếtMaker TOHNICHI - Made in Japan. Series LTD Adjustable...
Chi tiếtMaker ATTONIC - Made in Japan.It is a high performance,...
Chi tiếtMaker: IMADA, Made in Japan - High accuracy. - Peak...
Chi tiếtMaker TOHNICHI - Made in Japan. STC2-G (-BT) Indicating...
Chi tiếtMaker: TOHNICHI, Made in Japan. QSPCA Preset Click...
Chi tiếtMaker: IMADA, Made in Jpan. This torque gauge provides...
Chi tiếtMaker: TOHNICHI, Made in Jpan. Adjustable type torque...
Chi tiết• Multiple units of measure through keypad setup •...
Chi tiếtMaker: IMADA, Made in Japan - Available in capacity...
Chi tiếtThis torque gauge enables to measure screw cap bottle...
Chi tiếtManagement of electric screw driver , Everyday check...
Chi tiếtCedar Digital torque driver For tightening and final...
Chi tiếtDigital torque Wrench DIW-15/20/75/120 For tightening...
Chi tiếtMaker: TOHNICHI, Made in Japan. ATG / BTG Torque Gauge...
Chi tiếtMaker: TOHNICHI, Made in Japan. Suitable for Torque...
Chi tiết