• Slider sản phẩm

Danh mục sản phẩm

  • GIẢI PHÁP KIỂM TRA LỰC KÉO UỐN IMADA ACT-1000N, ACT-1000N-V300

  • Mã SP: ACT-1000N, ACT-1000N-V300
  • Giá: Liên Hệ
  • Maker: IMADA - Made in Japan. Automatic Crimp Tester ACT-1000N is ideal for crimp pull tests requiring high efficiency of testing and data management. The equipped functions support your measurement without additional options.You just press the button to perform the test and to store the result. Automatically, the moving part backs to the home position after testing and the tester saves the result to the internal memory and PC.
  • Danh mục: CÁC THIẾT BỊ ĐO LỰC
  • Nhà sản xuất: IMADA

Specification for Automatic Crimp Tester ACT-1000N

Model ACT-1000N ACT-1000N-V300
Capacity 1000N
Resolution 1N
Accuracy +/-0.5% F.S +/-1digit
Unit N, kgf ,lbf (*1)
Sampling rate 2000Hz
Safe overload rating Approx. 150% F.S.
Overload warning 110% or less
Measuring speed0 10/25/50/100 mm/min(Choose from 4 steps) 25/50/100/300 mm/min(Choose from 4 step)
Stroke Approx.50mm
Allowable sample diameter Terminal side: Slit width 1~8mm (*2)
Harness side: Aperture width 1~8mm (*2)
Allowable sample length 100mm or more
Mode BREAK/KEEP mode
Number of registered test condition 26 patterns(A~Z)
Output USB/RS232C/pass or fail decision signal (OK/NG)
Security lock Emergency stop button and Overload prevention (at the power on)
Power supply AC100~240V
Weight Approx.11kg
Size W400*D240*H150
Operating environment Temperature :0~40 degree Celsius Humidity:20~80%RH
Conformance Testing -UL 486A-486B(2013) “ Standard for Safety for Wire Connectors, 9.3.4 Pullout test”-IEC 60512-16-4(2008)
” Connectors for electronic equipment – Tests and measurements-
Part 16-4: Mechanical tests on contacts and terminations – Test 16d: Tensile strength (crimped connections)”-JIS C2805(2010) “Crimp-type terminal lugs for copper conductors.”
Accessory Software, USB cable, Power cord, Inspection Certificate

Selectable Test Mode: BREAK mode and KEEP mode
2 modes are selectable. BREAK mode: In this mode, you can perform destructive test.
KEEP mode: In this mode, you can perform nondestructive test to apply specific force in set time.

The OK/NG (Pass/Fail) result is clear to see in both test modes.

Storable 26 Test Patterns
The tester is capable of saving up to 26 test patterns as presetting.
You can immediately recall each pattern.  Smooth test condition change is possible.

Easy Data Management
ACT-1000N includes the software. It is ideal for checking the result such as force value, OK/NG (Pass/Fail) result and each test condition.

Also, the statistics such as No.of OK/ NG/ Whole values, average, etc. is automatically calculated. It is also possible for each test pattern.

[Performable Test According to Standard]
- UL 486A-486B(2013) “ Standard for Safety for Wire Connectors  9.3.4 Pullout test” .

Quý khách có nhu cầu vui lòng liên hệ Mr Khoa 0987.998.477 hoặc e-mail: sales@shinzo.com.vn

 

Các sản phẩm khác
Hotline:0987.998.477