Mutual Features and Functions of DTXS/DTXA series]
For Accurate Torque Measurement
IMADA Screw Cap Torque Tester DTX series measure torque in CW/CCW.
The accuracy +/-0.5% F.S. and the 2000Hz high speed sampling rate capture accurate force values of testing.
The capacity is 2N-m(200N-cm) to 10N-m(1000N-cm).
Useful Functions
DTX series equips a lot of useful functions for torque measurement.
Peak hold function, Data saving function (up to 1000 points to the internal memory), Pass/Fail decision and more.
Ideal for Data Management
Many types of output signals are available such as USB, analog, RS232C and more.
Connecting with a processor, data output is possible at no PC environment.
The included software ZT logger supports DTX data output from the internal memory to a PC.
Moreover, drawing a torque- time graph on PC is possible at 2000 data/sec
by the optional software Force Recorder (Light / Standard).
[DTXA series Original Function]
Direct Data Output for a USB Flash Drive
Not only stored data but also continuous data can be output
for a USB flash drive at 100Hz, 50Hz or 1Hz. ( The sampling rate is selectable.)
Capturing 1st peak/2nd peak
This torque gauge captures the highest peak torque and 2nd highest peak torque without PC.
Displacement I/O
Torque- Angle measurement is possible when combining with Torque Stand MTS series equipping a rotary encoder.
(Torque-Angle Measurement Unit is available which includes necessary items of Torque-Angle Measurement.
Please see Torque-Angle Measurement Unit TAA-MTS-TB series if you are interested in).
[Testing Applications]
– Screw cap (jar lid) opening torque test >>
- Key turning torque test >>
- Lipstick container turning force test >>
*Please click the applications for further information
Please see Force Gauge when you need to measure compression or tension force.
Model | DTXA | DTXS |
---|---|---|
Feature | Advanced model equipping various functions such as input/output the angles and saving to USB flash drive. | Simple standard model maintaining DTXA performance. |
Accuracy | ±0.5%F.S.±1digit | |
Unit of measurement | N-m, N-cm, kgf-m,kgf-cm, ozf-in, lbf-in (Unit switching is possible.)(*1) | |
Display | 4-digit | |
Display update | 16 times/ sec | |
Sampling rate | Maximum 2000 data/ sec(*2) | |
Battery | 8 hours (2 hours full charge)(*3) | |
Safe overload rating | Approx. 200%Approx. 200% | |
Operating Environment | Temperature: 0 -40 degree Celsius Humidity: 20 -80%RH | |
Function |
Customized display(header and footer) / Peak hold(Clockwise and Counterclockwise)/Internal memory(1000 point data))/ Comparator (OK or NG judgment)/Reversible display/ Sign inversion/ Zero clear timer/ +NG alarm/Off timer(Auto power off)/ Dumping/ Time display/ setting lock |
|
1st2nd peak/Angle detection at torque peak value(*4) /Angle zero reset at selected torque(*4) |
- | |
Output |
USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm |
|
Sub comparator 2 steps (output of large or small judgment), USB flash drive, Angle(displacement) |
- | |
Overload warning | Approx.110%F.S. (Warning message and alarm ) | |
External connecting switch | SEND (a point of contact holding), Zero reset, Peak, ON/OFF setting | |
Weight | Approx. 4.5kg (Including Standard table and Standard pins) | |
Dimensions | Please refer to dimensions. | |
Accessory |
AC adapter, Inspection certificate, CD driver (including simple software for data logging), USB cable |
|
USB flash drive adapter(*6) | - | |
Applicable Table | Please see Specification for Torque Gauge Table Attachment | |
Applicable Attachment | Please see Specification for Torque Gauge/ Motorized Stand Attachment |
*1 These are the specifications for International model.
Please note that this unit is different from Japanese domestic model and international one.
*2 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*3 The battery is more consumed when connected to USB flash drive or a displacement scale.
*4 Angle(displacement) scale is necessary to valid this function.
*5 Not always available for Mitutoyo digimatic products.
*6 USB flash drive is not included
Model | Range | Display | Resolution | |
---|---|---|---|---|
DTXA-2N | DTXS-2N | 2 N-m (200N-cm) | 2.000N-m (200.0N-cm) | 0.001N-m (0.1N-cm) |
DTXA-5N | DTXS-5N | 5 N-m (500N-cm) | 5.000N-m (500.0N-cm) | 0.001N-m (0.1N-cm) |
DTXA-10N | DTXS-10N | 10N-m (1000N-cm) | 10.00N-m (1000N-cm) | 0.01N-m (1N-cm) |
Quý khách có nhu cầu vui lòng liên hệ Mr Khoa 0987.998.477 hoặc e-mail: sales@shinzo.com.vn
Maker IMADA - Made in Japan. DST series là dòng kế...
Chi tiếtMaker: Aikoh - Made in Japan. ・Easy-to-read display. ・Auto...
Chi tiếtMaker: Aikoh - Made in Japan. ・A handy type torque...
Chi tiếtDigital torque Wrench DIW-15/20/75/120 For tightening...
Chi tiếtDigital torque Wrench DIW-15/20/75/120 For tightening...
Chi tiếtThe check of "the torque value of the screw actually...
Chi tiếtWith reinforced plastic body, light, small measuring...
Chi tiếtMaker TOHNICHI - Made in Japan. STC2-G (-BT) Indicating...
Chi tiếtTorque tester NDI-800CN NDI-80CN A new torque tester...
Chi tiếtCỜ LÊ LỰC/ Seris SP/ SP(2)/ SP(2)-MH - TOHNICHI....
Chi tiếtMaker: ATTONIC. Made in Japan. ATTONIC AP Only Newton....
Chi tiếtDigital force gauge DSV series is advanced model for...
Chi tiếtHigh functionality type digital force gauge has capacity...
Chi tiếtTohnichi QLE750N2 dòng sản phẩm được sản...
Chi tiếtMaker: TOHNICHI, Made in Japan. Cần siết lực...
Chi tiết