MÁY ĐO LỰC SIẾT VÍT CEDAR CD-100M, CD-10M

Danh mục sản phẩm

Trang Chủ Sản Phẩm CÁC THIẾT BỊ ĐO LỰC THIẾT BỊ ĐO XIẾT LỰC MOMEM XOẮN MÁY ĐO LỰC SIẾT VÍT/TORQUE METER, CD-100M, CD-10M - CEDAR

MÁY ĐO LỰC SIẾT VÍT/TORQUE METER, CD-100M, CD-10M - CEDAR
Mã SP: CD-10M, CD-100M
Giá: Liên Hệ
Management of electric screw driver , Everyday check of an electric driver can be performed. Since various information is displayed on a display board, it is very intelligible. The change of a measurement unit can be performed. Memory data is 800 affairs. Real-time output Every about 1 / 180 seconds The taking-in software of data can download from a homepage.
Danh mục: CÁC THIẾT BỊ ĐO LỰC
Nhà sản xuất: CEDAR

Torque tester CD-100M, CD-10M

The best for everyday check of an electric driver

Everyday check of an electric driver can be performed.
Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output Every about 1 / 180 seconds

CD-10M

CD-100M

Feature :

- Show "Measurement mode", "Measurement unit","maximum, minimum, average"
- Switchable measurement unit
- Enable to save 5 sets of settings such as upper limit and lower limit
- 800 items of memory data
- Real-time output About every 1/180 seconds
- Data acquisition software can be downloaded for free

*Specification*	CD－100M	CD－10M
Measuring range (at the time of Track)	0.10～10　N・m	0.010～1 N・m
	1.0～100 kgf・cm	0.10～10 kgf・cm
	1.0～90 lbf・in	0.10～9 lbf・in
Accuracy	±0.5％(199 or less digit±1digit)
Display	The 3.5 figures digital display of LCD
The measurement direction	CW-CCW (right and left)
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
High and low limits judging function	High and low value are measurement within the limits, and can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum, and the average value display	The maximum, the minimum value, and average value of the saved data
Automatic Clearance	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero	A clear button is pushed and it is a zero.　 Data is outputed.
Data output	ASCII format (baud rate 19200)
Power supply	Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	□ 20mm/ □9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160（W）×125（D）×55（H）
Attachment	Measurement joint　SJ50/SJ10K	Measurement joint　SJ10
Accessories (one piece each)	AC/DC adaptor
	Carrying case
	An inspection report, a proofreading certificate, traceability system figure

Measurement of an electric driver

Specification		SJ-10	SJ-50
Measuring range	N･m	1（MAX)	5（MAX)
Outer diameter size（mm）	Bit engagement part (screw part)	HEX　 Opposite neighborhood　5㎜	HEX　 Opposite neighborhood　6㎜
	Outside diameter／Height	φ17 ／ 45（un-compressing）	φ20 ／ 42（un-compressing）
	Ｉnstallation	20Square×4（ｔ）