Torque tester CD-100M, CD-10M
The best for everyday check of an electric driver
Everyday check of an electric driver can be performed.
Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output Every about 1 / 180 seconds
Feature :
- Show "Measurement mode", "Measurement unit","maximum, minimum, average"
- Switchable measurement unit
- Enable to save 5 sets of settings such as upper limit and lower limit
- 800 items of memory data
- Real-time output About every 1/180 seconds
- Data acquisition software can be downloaded for free
Specification | CD-100M | CD-10M | ||
Measuring range (at the time of Track) |
0.10~10 N・m | 0.010~1 N・m | ||
1.0~100 kgf・cm | 0.10~10 kgf・cm | |||
1.0~90 lbf・in | 0.10~9 lbf・in | |||
Accuracy | ±0.5%(199 or less digit±1digit) | |||
Display | The 3.5 figures digital display of LCD | |||
The measurement direction | CW-CCW (right and left) | |||
Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | |||
High and low limits judging function | High and low value are measurement within the limits, and can be set up. | |||
Real-time Output | Load torque value is outputted every about1/ 180 second. | |||
The Maximum, the minimum, and the average value display | The maximum, the minimum value, and average value of the saved data | |||
Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance |
|||
One-touch zero | A clear button is pushed and it is a zero. Data is outputed. | |||
Data output | ASCII format (baud rate 19200) | |||
Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
Auto power save | 10 minutes no use, automatically switch off. | |||
Charging time | About 3 hours | |||
Continunous working time | About 12 hours | |||
Socket fit mouth | □ 20mm/ □9.5mm | |||
Weight | Abbreviation 1 kg | |||
Outside dimension | 160(W)×125(D)×55(H) | |||
Attachment | Measurement joint SJ50/SJ10K | Measurement joint SJ10 | ||
Accessories |
AC/DC adaptor | |||
Carrying case | ||||
An inspection report, a proofreading certificate, traceability system figure |
Measurement of an electric driver |
Specification | SJ-10 | SJ-50 | |
Measuring range | N・m | 1(MAX) | 5(MAX) |
Outer diameter size(mm) |
Bit engagement part (screw part) |
HEX Opposite neighborhood 5㎜ |
HEX Opposite neighborhood 6㎜ |
Outside diameter/Height | φ17 / 45(un-compressing) | φ20 / 42(un-compressing) | |
Installation | 20Square×4(t) |
Quý khách có nhu cầu vui lòng liên hệ Mr Khoa 0987.998.477 hoặc e-mail: sales@shinzo.com.vn
ATTONIC Japan Digital Torque Meter AD-TM Series. IIt...
Chi tiếtMaker: TOHNICHI, Made in Japan. DB25N5-1/4-S Dial Indicating...
Chi tiếtThe Series TNP Digital Torque Meter is a precision...
Chi tiếtA handy type torque gauge with a measuring part and...
Chi tiếtMaker CEDAR - Made in Japan. Suitable for daily inspection...
Chi tiếtTHIẾT BỊ ĐO LỰC MOMEN XOẮN TOHNICHI 2TME1000CN2...
Chi tiếtHand Held Model Digital Tension Meters DTMX Series...
Chi tiếtMaker: Imada - Made in Japan. ZT Digital Force Gauges...
Chi tiếtMaker: ATTONIC, Made in Japan - Feature It enables...
Chi tiếtMaker CEDAR - Made in Japan. Suitable for daily inspection...
Chi tiết