• Slider sản phẩm

Danh mục sản phẩm

  • Cần siết lực/TORQUE WRENCH, QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH - TOHNICHI

  • Mã SP: QSPCAMS6N, QSPCAMS12N, QSPCALS30N, QSPCALS70N, QSPCAFHP6N, QSPCAFHP12N, QSPCAFH30N, QSPCAFH70N, QSPCAFH, QSPCAFHP, R-FH256
  • Giá: Liên Hệ
  • Maker: TOHNICHI, Made in Japan. Torque Error Proofing Wrench
  • Danh mục: CÁC THIẾT BỊ ĐO LỰC
  • Nhà sản xuất: TOHNICHI

Features

  • A torque wrench that prevents 3 problems: under-tightening, over-tightening, and other human tightening errors.
  • QSPCAMS and QSPCALS are rotary slip-type torque wrenches with wired limit switch. When set toque is reached, rotary slip occurs with simultaneous output of a contact signal from the limit switch.
  • QSPCAMS and QSPCALS have a highly durable curly cord.
  • A limit switch can be connected to a CNA-4mk3 count checker (sold separately) to easily create a tightening count management system.
  • Signals from the limit switch are captured on a programmable logic controller (PLC) or similar device to establish a Tightening Assurance System using assembly line interlock controls.
  • With the QSPCAFHP and QSPCAFH, when set torque is reached, rotary slip occurs and a tightened-to-completion radio signal is transmitted. The system is cordless, greatly increasing workability.
  • QSPCAFHP and QSPCAFH torque wrenches can be used with the R-FH256 receiver (which is sold separately). With a connection to the I/O-FH256 multi-box (sold separately), a single receiver can recognize the IDs of up to four torque wrenches. Connect the I/O-FH256 and the CNA-4mk3 Count Checker to easily establish an error proofing system.
  • The QSPCAMS / QSPCALS / QSPCAFHP / QSPCAFH conform to the IEC 61340-5-1:2007 Standard (protection of electronic devices from electrostatic phenomena).
  • Compliant with calibration procedures of ISO 6789 Type II Class B.

Specifications

MODEL QSPCAMS6N QSPCAMS12N QSPCALS30N QSPCALS70N QSPCAFHP6N QSPCAFHP12N QSPCAFH30N QSPCAFH70N
S.I. TORQUE RANGE [N • m] MIN.～MAX. 2～6 4～12 10～30 20～70 2～6 4～12 10～30 20～70
METRIC TORQUE RANGE [kgf • cm] MIN.～MAX. 20～60 40～120 100～300 200～700 20～60 40～120 100～300 200～700
AMERICAN TORQUE RANGE [lbf • in] MIN.～MAX. 20～50 40～100 90～270 180～620 20～50 40～100 90～270 180～620
DIMENSION [mm] OVERALL LENGTH L 197 267 346 197 267 346
SQ. DRIVE a 6.35 9.53 6.35 9.53
HEAD R 14 17 21.5 14 17 21.5
HEIGHT h 37 48 58 37 48 58
BODY e 34 40.5 49 34 40.5 49
W 42 51 57.5 44.3 51 57.5
φd 15 20 27.2 15 20 27.2
φD 29 34 - 24 34 -
WEIGHT [kg] 0.33 0.64 1.24 0.33 0.64 1.24
ACCURACY [％] ±6 ±4 ±6 ±4
MODEL Torque Wrench Receiver
QSPCAFH QSPCAFHP R-FH256
FREQUENCY BAND 2.4GHzband (2.402GHz～2.479GHz、1MHz interval 78ch)
COMMUNICATION SYSTEM Spread spectrum(frequency hopping system)
MODULATION SYSTEM GFSK
MODULATION RATE 1Mbps
GROUP CHANNEL 256(000～255)
ID ３digit (000～999)、7digit (alphanumeric）
INPUT/OUTPUT － no voltage contact
output(1a)
RS232C output
POWER　[V] DC1.5V(AAA alkaline battery) DC3V(CR2032) AC100V～240V
ANTENNA chip antenna pattern antenna dipole antenna
OPERATING TEMPERATURE RANGE [℃] 0～45
TRANSMITTING RECEIVING DISTANCE [m] about 10～20

Notes

  • QSPCAMS / QSPCALS limit switch ratings: AC30V below 1A, DC30V below 1A.
  • Length of standard MS/LS curly cord (when extended): Approx. 2m
  • Female connector is not supplied for MS/LS cord.
  • QSPCAFHP, QSPCAFH and R-FH256 receivers and the SB-FH256 setting controller can be used in Japan, the U.S., Canada, the EU, China, Malaysia, Indonesia, India, Thailand, South Africa, South Korea, Russia, Taiwan, Mexico and Vietnam.

Quý khách có nhu cầu vui lòng liên hệ Mr Khoa 0987.998.477 hoặc e-mail: sales@shinzo.com.vn 

Các sản phẩm khác
Hotline:0987.998.477