- Automatic measurement to standardize the process
- Automatic temperature measurement
- Measurement counter can be useful for control of changing sensor.
- Fine sensor can deliver accurate measurements.
FG-100B-81 Specifications:
Model No. | FG-100B-81 |
---|---|
Power supply | 006P 9V dry battery (alkaline cell recommended) |
Temperature resolution | 1ºC |
Temperature measurement range | 0 to 700ºC |
Temperature precision | ±3ºC (300 to 600ºC) ±5ºC (other than above) |
Temperature sensor | K (CA)type thermocouple |
Display | LCD : 3 1/2 digits |
Operating environment | Ambient temperature/humidity range : 0 to 40ºC, 20 to 90%RH (without condensation) |
Environmental conditions | Applicable rated pollution degree 2 (According to IEC/UL 61010-1) |
Dimensions | 68(W)×140(H)×38(D) mm |
Weight | 125g |
*Automatic temperature measurement:AUTO HOLD Function
The measurement will end automatically when tip temperature is stabilized.
The measurement process will be the same no matter who does it.
* Constant display of measured max. temperature:MAX HOLD Function
Max measured tip temperature will be displayed.
This function can be useful for quality control of components and P.W.B.
The sensor replacement period is about 50 times per single sensor in general,
but this changes depending on the temperature used and the components in the solder and flux.
If you use lead-free solder, the sensor needs to be replaced more frequently.
If the sensor degrades because it is being eaten away by the solder, it will register a low temperature.
Even if the sensor is not broken, replace it after about 50 measurements.
Even if the soldering tip has degraded, the temperature will register extremely low.
Keep these points in mind and decide on the sensor replacement period.
Caution: The sensor is extremely thin and may break if pushed with force.
Quý khách có nhu cầu vui lòng liên hệ Mr Khoa 0987.998.477 hoặc e-mail: sales@shinzo.com.vn
A probe for SK-1260 suitable for mid-temperature of...
Chi tiếtNo.2030-42. This model is of 0 to 100°C, 100-mm sensing...
Chi tiếtAtmospheric pressure settings for the measurement location...
Chi tiếtMeasurement Range: Temperature / Humidity -0 to 55°C...
Chi tiếtDustproof type 7 day chart (55 sheets/box) for Sigma...
Chi tiếtRecording pen (violet) used with Sigma II series recorders,...
Chi tiếtSimple, Compact with a Variety of Sensors Compact...
Chi tiếtDustproof type 1 day chart (400 sheets/box) for Sigma...
Chi tiếtMaker: Sato, Made in Japan. Nhiệt ẩm kế kỹ...
Chi tiếtStandard probe with stainless steel grip (rate: IP...
Chi tiếtVarious optional probes for SK-1250MCIII α are still...
Chi tiếtNhiệt độ: 0-50°C/ -50-70°C. Độ ẩm: 25-94% Digital...
Chi tiếtPrecision Hair Hygrometer with Digital Thermometer...
Chi tiết