THIẾT BỊ ĐO LỰC MOMEN XOẮN CEDAR - WDI series

WDI-10HR   WDI-100HR   WDI-250

• - Easy-to-understand color display.
• - 10HR / 100HR is capable of high-resolution measurement with 1/10 the normal resolution.
• - Equipped with data output via USB / RS232C.
• - Clear signals and various commands can be sent from a personal computer or PLC.
• - Measurement joints can be selected according to the management method and tool characteristics.
• - Manual tool measurement jig A screw cube is attached according to the measurement band.
• - A storage case is available as an option.
• - The WDI series includes WDI-100HR, WDI-10HR, and WDI-250.
• - External dimensions--160(W) 143(D) 58(H) mm

Works with PCs and PLCs
Various commands can be input from PLC or personal computer. Finer torque management is possible with external control.
 

Command list
Clear signal: Clears the display and saves the held numerical value as data output and
memory.
Measurement mode: Change the measurement mode
Measurement channel: Change individual channels for which conditions such as pass / fail
judgment are set.
Peak hold upper limit: Change the pass / fail judgment upper limit of the current channel
Peak hold lower limit: Change the pass / fail judgment lower limit of the current channel
Peak down lower limit: Change the peak down judgment start lower limit of the current
channel
Real-time output lower limit: Change the output lower limit of real-time output
Auto clear time: Change the time to automatically clear after the measurement is
completed.
Buzzer notification: Change the buzzer notification method

Specification