MÁY ĐO TỐC ĐỘ VÒNG QUAY HT-5500 ONO SOKKI

Danh mục sản phẩm

Trang Chủ Sản Phẩm THIẾT BỊ ĐO PHÒNG SẠCH, MÔI TRƯỜNG MÁY ĐO TỐC ĐỘ VÒNG QUAY HT-5500 ONO SOKKI

MÁY ĐO TỐC ĐỘ VÒNG QUAY HT-5500 ONO SOKKI
Mã SP: HT-5500
Giá: Liên Hệ
HT-5500 Máy đo tốc độ vòng quay điện tử, đo được tiếp xúc hay ko tiếp xúc đều được.
Danh mục: THIẾT BỊ ĐO PHÒNG SẠCH, MÔI TRƯỜNG
Nhà sản xuất: ONO SOKKI

Handheld Digital Tachometer

HT-5500

ONO SOKKI

ONO

Features

Wide measurement range from 6.0 r/min (low-speed rotation) to 99999 r/min (high-speed rotation)

HT5500

■ Lo range	6.0 to 600.0 r/min
■ Hi range	6 to 99999 r/min

Capable of both contact and non-contact measurement in one unit
Built-in memory function - 20 data (MAX) can be saved to memory.
Line speed measurement is possible by setting the diameter of rotational object even though it is non-contact measurement. (Circumferential ring such as KS-100/KS-200 should be attached at HT-5500 when it is contact measurement.)
Accumulating rotation can be measured. (1 pulse/rotation by contact measurement. 1 count/1 reflection mark to 9999 is possible by non-contact measurement
Both analog and pulse outputs provided as standard

■ Analog output	0 to 1 V/0 to F.S. (Full scale can be set arbitrarily), 10-bit D/A conversion
■ Pulse output	Hi level = At least +4.5 V, Lo level = Up to +0.5 V

Hold function of Max. and Min. values of rotation, period and line speed.
Large LCD with backlight
Can be mounted on a tripod

Specifications

Detection methods

Optical reflective non-contact measurement; contact method (contact adapter supplied)

Measurement units

r/min, r/s (rotations)
m/min (line speed)
ms (cycle)
COUNT (cumulative count)

Measurement ranges

	Non-contact method	Contact method
r/min (Hi range)	6 to 99999	6 to 20000
r/min (Lo range)	6.0 to 600.0	6.0 to 600.0
r/s	0.10 to 999.99 r/s	0.10 to 400.00 r/s
m/min	0.6 to 9999.9 m/min	0.6 to 400.0 m/min
COUNT	0 to 99999 COUNT	0 to 99999 COUNT
ms	0.6 to 9999.9 ms	2.5 to 9999.9 ms

Reflection detection distance

20 to 300 mm

Display

5-digit LED, with backlight (character height: 10.2 mm)

Measurement time

Within 1 s + time required for one cycle (however, when the rotation is less than 60 r/min, twice the time required for one cycle (MAX))

Display update time

Approx. 1 s

Measurement accuracy

Displayed value^* x (±0.02 %) ± 1 count
* The displayed value is the count value excluding figures after the decimal point.

Note:

▉

The measurement accuracy of the circumferential speed depends on the number of rotations of the rotating object.

▉

The measurement accuracy given above is for non-contact measurement. Measurement errors caused by hand shake are not included. With contact measurement, the smoothness and accuracy of the contact tip are added to the above value.

Peak hold function

Maximum value (MAX), minimum value (MIN)

Memory function

20 data (MAX)

Over-range function

The over-range alarm (ERROR mark) is displayed when the measured value exceeds the display range.

Rotation upper limit alarm function

The upper limit alarm ( ↑ mark) is displayed when the number of rotations exceeds the preset upper limit value.

Line speed calculation function

•Calculates the line speed from the preset diameter value (mm) and the measured number of rotations
• Use the KS-100/200 circumferential rings

Accumulating function

Provides a cumulative count of the input signal pulses

Cycle measurement function

Measures the input pulse cycle (however, when the cycle is less than 1 s, measures the mean value of the input pulses)

Analog output

Output voltage : 0 to 1 V/0 to F.S. (Full scale can be set arbitrarily.)
Conversion method : 10-bit D/A conversion
Linearity : ±1 %/F.S.
Output update time : Within 50 ms + 1 cycle
Temperature stability : ±0.05%/FS/°C (span & zero)
Setting error : ±0.5 %/F.S.
Load resistance : At least 100 kΩ

Pulse output

Output voltage : Hi level = At least +4.5 V, Lo level = Up to +0.5 V
Output logic : Positive logic
Load resistance : At least 100 kΩ

Operating temperature

0 to 40 °C

Storage temperature

-10 to 50 °C

Power source

Four AAA alkaline batteries or exclusive AC adapter (PB-7090 option)

Battery life

At least 32 hours (when the backlight is OFF)
At least 8 hours (when the backlight is ON)

Low battery alarm indicator

A low battery alarm mark (LOW) is displayed when the battery voltage falls below 4.4 V.

Outer dimensions

180.5 (W) X 47.5 (H) X 66 (D) mm
237.2 (W) X 47.5 (H) X 66 (D) mm (with the contact adapter)

Weight (including batteries)

Approx. 267 g
Approx. 329 g (with the contact adapter)

Accessories

Contact adapter (HT-0502) 1
Contact tip for rotation measurement (KS-300) 1
Circumferential ring (KS-200) 1
Reflective marks (12-mm square; 25 pcs.) 1 sheet
AAA alkaline batteries 4
Carrying case 1

Peripherals
(sold separately)

AX-501 Signal output cable (2-m length) (used for both analog and pulse outputs) ø2.5 pin plug—CO2 (BNC) plug
HT-0522 Magnetic stand + HT-0521B Stand jig
LA-0203A Measurement tripod (Used in combination)
PB-7090 AC adapter (100 to 240 VAC)
HT-0502 Contact adapter
KS-100 Circumferential ring (mm/s)
KS-200 Circumferential ring (m/min)
KS-300 Contact tip (for rotation measurement)
KS-700 Extension shaft for KS-300
HT-011 Reflective marks (10 sheets/pack)