MÁY ĐO ĐIỆN TRỞ BỀ MẶT SIMCO-ION ST-4

Danh mục sản phẩm

Trang Chủ Sản Phẩm THIẾT BỊ ĐO PHÒNG SẠCH, MÔI TRƯỜNG MÁY ĐO ĐIỆN TRỞ BỀ MẶT SIMCO-ION ST-4

MÁY ĐO ĐIỆN TRỞ BỀ MẶT SIMCO-ION ST-4
Mã SP: ST-4
Giá: Liên Hệ
MÁY ĐO ĐIỆN TRỞ BỀ MẶT SIMCO-ION ST-4. Just place on top of the item to measure to read its surface resistance. It can also measure total electrical resistance to ground (ground leakage resistance) from the surface. Suited for examining and managing conductive mats, floors, anti-static bags, air caps, etc.
Danh mục: THIẾT BỊ ĐO PHÒNG SẠCH, MÔI TRƯỜNG
Nhà sản xuất: SIMCO

SIMCO Surface resistance meter

Model: ST-4

Feature

• Just put on top of the measured object, and measure the surface resistance.
• Since the portable type, it is easy to handle in the field
. Because it uses a rechargeable battery is a friendly design for the environment.
• Measurement range 10 3 to 10 13 Ω / □ (or Ω) So, can measure the resistance of various materials and products.

• Conductive mat, conductive floor, conductive bag, making it ideal for inspection, maintenance and management, such as anti-static products.
• IEC standard compliant (optional) IEC standard electrodes (contact area and weight) I compliant.

ST-4

Function

- Unparalleled ease. Surface resistance value can be achieved in about 15 seconds by pressing the button.
ST-4 is portable, easy operation.
- Perform the measurement of surface resistance by simply putting the object to the measured value.
- In addition, the surface and the ground leakage resistance of the conductive mat, such as putting the body can be measured.

ST-4

Specification :

Measurement range	10 ³ ~ 10 ¹³ (Ω / □ or Ω)
Measurement mode	① standard measurement mode (Ohm per square, Surface Resistivity) ② mat surface - between the mat of ground terminal resistance measurement mode (Ohms, Resistivity to Ground) The resistance measurement mode of use ③IEC standard the supplied code Method to measure in the manner of IEC standard electrodes (contact area and weight)
LCD Display	Index display (the display to one decimal place) Display battery level display of countdown of measurement time by the bar graph
LED Display	①TEST Green LED lights: standard measurement mode display (Ohm per square, Surface Resistivity) Red LED lights up: Matt - between the ground terminal resistance measurement mode (Ohms, Resistivity to Ground) And display ② measured voltage display of resistance measurement mode of the IEC standard (10V, 100V) Green LED lights: 10V output red LED lights: 100V output yellow LED lights: the end of measurement ③CHARGE Red LED lights: in the battery charge display
Measurement time	15s, 30s, 60s
Range setting	It can range setting of upper and lower limit to the measured value (Can be set to 0.5 square every)
Measurement accuracy	Index display value ± 0.5 (index) (example: 10 ^{8.5 0.5)}
Measured voltage	Automatically the voltage from the switching ①3 square sixth power: 10V, 10mA max ②6 13 square from the square: 100V, 1mA max
Power supply	The method by built-in battery
External connection terminal	① connector for an external electrode connection ②AC adapter connector (battery charging) {USB mini type}
Measurement area	50mm (electrode length) × 50mm (electrode spacing) (at the time of surface resistance measurement)
Electrode material	Special conductive rubber (volume resistivity 0.02Ω · cm MAX.)
Measurement environment	15 ℃ ~ 25 ℃, less than 60% RH
Body dimensions	114 (
	25g